Applications:

Lubrication: Use Lanoguard spray wherever you would use a spray lubricant for long term lubrication as it will not evaporate or leach off. A real bonus is that it acts as a corrosion inhibitor and an anti-seize as while providing lubrication.

Use Lanoguard grease wherever you would use a heavy duty grease to get the same benefits as above. Note: the grease is not suitable for packing high-speed bearings, but can be used as a corrosion treatment by pre-heating bearings and painting them with Lanoguard grease. They should then be packed with load bearing high-speed grease.

Rust proofing: For all metal products: firearms, tools, cars, trucks, trailers and machinery, plant and pipes used for irrigation or aquaculture, saw blades: spray with heavy duty or general purpose Lanoguard spray or apply a coat of grease over the surface. Lanoguard will work effectively over painted surfaces and also improves the appearance of painted surfaces. When spraying, wipe over with a clean dry cloth to remove the excess. When applying grease, first melt to a liquid (can be heated in a microwave with the lid off) and apply with a paint brush.

Electrical: Spray onto all electrical components to provide non-conductive corrosion inhibiting waterproof barrier, as well as an anti-seize on spade clips, etc. Spray all wiring and cables to stop perishing and keep them supple. Grease all battery terminals to prevent corrosion and effectively create an interface free of current when all connections are treated. Spray aerials and antennas to prevent corrosion and electrolysis interfering with reception.

Welding anti-splatter: Use spray or grease as a welding anti-splatter and nozzle dip (e.g. MIG and plasma cutter nozzles) to protect surfaces from splatter and equipment from splatter damage.

Waterproofing: Spray all tarps, tents, covers, sewn seams etc, to waterproof and apply grease to zippers to waterproof the seal and act as an anti-seize. Apply to exterior blinds to waterproof and help restore faded colors and spray all runners etc for lubrication and corrosion inhibiting.

Food Industry: Lanoguard sprays and grease are fully approved for use in and around the food industry. IOA No. 5525, Type A, Category 10 and IOA 5526, Type C, Category 12. Use the spray or grease for lubrication and corrosion inhibiting. Also use the spray as a protective coating for benches, cupboards, etc, as spills will sit on the coating for easy cleaning rather than coming into contact with the surface. Note: use sparingly (i.e. light spray and wipe over with a clean dry cloth).

Rubber Grease: Lanoguard products are ideal and effective rubber lubricant as they contain no petroleum products. Used as a rubber grease, Lanoguard will prolong the life of O-rings, seals, hoses, etc, as well as keeping them supple and improving sealing qualities. It will also improve the appearance of exterior rubbers.

Preventing Electrolysis in dissimilar materials: Lanoguard will prevent electrolytic corrosion caused by dissimilar materials coming into direct contact. Once surfaces are sprayed or grease is applied, there is a fine film of non-conductive Lanoguard in between the two surfaces, preventing any reaction.

Anti-seize: Spray or grease nuts, bolts, studs and screws to prevent any seizing in temperatures up to 450C.

Penetrene: Spray or soak rusted parts to free up previously seized parts.

Concreting: Apply to shovels, trowels, formwork, around aluminum frames and windows in concrete pours. Lanoguard stops concrete from adhering to surface. Its I also a very good mold release.

Saws: Spray all saws, chainsaws and wood working implements. Lanoguard will stop sap buildup and corrosion caused by corrosive sap from timber. This treatment also gives tools an improved appearance.

Fertilizers: Lanoguard will stop all corrosion caused by fertilizers, especially in spreaders and storage areas.

Swimming Pools: All pool pumps can be protected from corrosion by spraying with Lanoguard. Grease can be used on all O-rings.

Lube: When drilling high carbon steel Leather & Vinyl:

Uses for leather and vinyl products include:

Work boots, golfing shoes, football boots or any other leather footwear can be enhanced and waterproofed by using Lanoguard spray or grease and rubbing it with a cloth

Waterproofing sewn seams in tarps and tents

Canopies in boats can be waterproofed by rubbing in Lanoguard

Spray it onto a cloth and rub it into the dashboard of a car

Saddles, reins and harnesses can be restored and waterproofed

Waterproof and stop sweat marks on leather lounges by rubbing Lanoguard into them with a soft cloth.

Available at most hardware and marine stores.  
Phone 0800 lanoguard - 0800 526648 for direct sales or store information.